Spar parts for PVP 252 Motor          Page 1              Page in PDF

2 3 4 5 6
7 8 9 10 11

O-ring line in center no. 799 (2.62x1100) and O-ring no. 789 (139.38x2.62) 
114 Crankcase left and right side - 2019 1

125 Insert to crankcase 2
126 Insert to crankcase 2014 2

O-ring line under this cover no. 796 (2.62x980)
128 Primary drive cover 1

129 Cover over clutch drum

1

132 Bracket under clutch drum

1

Square ring for this no. 1871 (34x2.94x3.2)

133 Clutch relies bracket 1

135 Piston to clutch relies 1

138 Plate to air vent.

1

 

O-ring for this no. 742 (18.77x1.78)

Oil seal for this no. 802
140 Bracket for shift shaft

2

O-ring for this no. 775 (50.52x1.78)

Oil seal for this no. 812
144 Oil seal holder

2

146 Ring behind main bearing

2

O-ring for this no. 775 (50.52x1.78)

Oil seal for this no. 806

150 Bracket for ignition stator

1

 

155 Bracket for ignition coil

1

157 Impeller for shaft without bushing
158 Impeller for shaft with bushing

O-ring for front no. 766 (37.82x1.78

O-ring for back  no. 775 (50.52x1.78)

Oil seal for this no. 806 x 2
160 Bracket behind water pump

1

161 Water pump housing 1
164 Tube 25x34 1
 

O-ring for this no. 748 (22.3x2.4) 

165 Tube 28x23 1
166 Tube 28x35 1
167 Bend for water 1

O-ring for this no. 792  (183.82x2.62)

171 Disc valve cover
172 Disc valve cover 2014
173 Disc valve cover 2017 & 2019
175 Insert to disk valve cover
176 Insert to disk valve cover 2014
 
177 Insert to crankcase  2019
177 Insert to disk valve cover  2019