Spar parts for PVP 252 Motor        in PDF    

O-ring line in center no. 799 (2.62x1100) and O-ring no. 789 (139.38x2.62) 
114 Crankcase left and right side - 2019 1

O-ring line in center no. 799 (2.62x1100) and O-ring no. 789 (139.38x2.62) 
115 Crankcase left and right side - 2022 1

125 Insert to crankcase 2010-2013 2
126 Insert to crankcase 2014 2

O-ring line under this cover no. 796 (2.62x980)
127 Primary drive cover model 2022 1

 
128 Primary drive cover <1019 1

129 Cover over clutch drum 1

132 Bracket under clutch drum

1

Square ring for this no. 1871 (34x2.94x3.2)
133 Clutch relies bracket

1

Bearing for this is no. 836
135 Piston to clutch relies 1

138 Plate to air vent. 1

O-ring for this no. 742 (18.77x1.78)
Oil seal for this no. 802
140 Bracket for shift shaft

1

 

O-ring for this no. 775 (50.52x1.78)
Oil seal for this no. 812
144 Oil seal holder

2

146 Ring behind main bearing

2

O-ring for this no. 775 (50.52x1.78)
Oil seal for this no. 806
150 Bracket for ignition stator

1

152 Bracket

1
153 Bushing 5x8x18.5

Rubber for this is 1631
154 Bracket

155 Bracket for ignition coil  
157 Impeller for shaft without bushing
158 Impeller for shaft with bushing
O-ring for front no. 766 (37.82x1.78
O-ring for back  no. 775 (50.52x1.78)
Oil seal for this no. 806 x 2
156 Bracket behind water pump 2022
157 Impeller for shaft without bushing
158 Impeller for shaft with bushing
159 Water pump house 2022

 

O-ring for front no. 766 (37.82x1.78
O-ring for back  no. 775 (50.52x1.78)
Oil seal for this no. 806 x 2
160 Bracket behind water pump

  
161 Water pump house <2019
162 Tube 22x23
163   Tube 25x29
O-ring for this no. 748 (22.3x2.4) 
165 Tube 28x23
O-ring for this no. 748 (22.3x2.4) 
166 Tube 28x33

 

167 Bend for water
O-ring inside the bend no. 742
169 Bend for water front 2022

O-ring for this no. 792  (183.82x2.62)
171 Disc valve cover
172 Disc valve cover 2014
173 Disc valve cover 2017 & 2019
175 Insert to disk valve cover
176 Insert to disk valve cover 2014
 
177 Insert to crankcase  2019
177 Insert to disk valve cover  2019
178 Rear motor mount, New type 2
     
182 Pin hardened 6x16 4
184 Bushing  8/10x17 (2017) 4
185 Bushing  8/10x12 (2019> 4
   
186 Plate to bottle  1
187 Tube behind 186 2
188 Plats bottle 1

O-ring for this 786 (101.27x2.62)
Oil seal for this 812
191 Gear box cover 1
192 Gear box cover 2017>  
204 2017>-Crankshaft front -120mm. rod  
214 2017>-Crankshaft rear -120mm. rod
220 Bushing for rear crankshaft
    
221 Washer ø20/35x1 4
223 Needle cage ø20/26x15 2
 
   
226 Rod 115 mm. center distends 
 
227 252  Crankshaft pin 20x50 with 7.9 mm hole
228 Rod 120 mm. center distends   
240 Tandem gear 47 T.  
250 Tandem gear 47/26 T. 1
256 Key 3x3.7x13 2
260 Nut M22x9x1.5 2
270 Disk valve hub complete 2
,
271 Disk valve hub front for update 2014 1
281 Disc valve 134x1  
282 Update Disc valve 127x1  
283 2017 Disc valve 129x1  
292 Rubber for carburetor  2
293 Ring for carburetor  rubber 2
294 Clamp for rubber 292 2
 
PVP Cylinder spare parts no. 304
O-ring top inside 778 (60x2)
O-ring top outside 784 (94.92x2.62) 
O-ring under this 775 (50.52x2.62)
O-ring under this: cut 784 (94.92x2.62)
 

O-ring for this 775 (50.52x2.62)
O-ring for this: cut 784 (94.92x2.62)
309 Alum. Gasket 5 mm. thick 
310 Alum. Gasket 7 mm. thick 

 

 

O-ring on top for this 754 (24x3)
312 Combustion chamber 2.1 mm. 
313 Combustion chamber 2.15 mm. 
314 Combustion chamber 2.2 mm. 
 

O-ring on top for this 754 (24x3)
315 Combustion chamber 2.25 mm. 
316 Combustion chamber 2.3 mm. 
317 Combustion chamber 2.35 mm. 
318 Combustion chamber 2.4 mm. 

336 Cylinder head cover front 1
337 Cylinder head cover rear 1
339 Bushing 18/22x26
341 Magnet plug
342 Nylon washer
343 Plug screw  1/4" pipe tread 2
344 Plug screw  3/8" pipe tread 2
347 Plug screw 1/8 pipe tread  
348 T- part for water with treed for temp probe  
O-ring between cylinder and socket no. 772 (45.69x2.62)
O-ring for exhaust pipe (FPM) no. 770 (42.52x2.62)
354 Exhaust socket   2
356 Bracket for exhaust  
357 Steel ring for exhaust  
366 Exhaust valve slide single step  2
370 Compression spring 4.6x32 8
374 Compression spring 13.2x0.8x52.5  
375 Compression spring 13.3x0.9x48.5  
379 Rubber bellow new type  
382 Bushing between 379 and 380  

O-ring under this 759 (32.99x2.62)

O-ring outside 742 (18.77x1.78) 
380 Valve rod housing 2
381 Bushing  6/12x42 2
     
384 Valve piston  
 385 Spring for 379
 
     
 389 Piston pin  15x45  
 
390 Needle bearing 15/19x19.6 2
392 Piston ring  54x1, for 394, 395, and 396
3962 Piston ring  54x0.8, for piston 3960 and 3975
 The diameter of a new cylinder is from 54.01 to 54.02  The piston is including piston pin, piston ring and C-clip Piston 3960 Replaces Piston 3965 
 
3960 Piston Di Carmine  53,96 piston pin is 24 mm. from top
 
3975 Piston Vertex  53,975, piston pin is 24 mm. from top

396 Piston Vertex  53,96, piston pin is 26 mm. from top
405 Clutch gear 58/18 1
410 Trust washer ø20/35x3.7 1
411 Inner race ø20/29x17 1
412 Needle bearing ø25/29x17 1
414 Trust washer ø20/35x1.5 1
415 Hex. nut M18x1.5 1
416 Tab washer NA20 1
420 Clutch drum 1
430 Inner pressure plate 1
436 Clutch hub for 5 sinter plate
437 Clutch hub for 6 sinter plate
440 Sinter plate 3.0 5
445 Clutch plate 1.5 4
450 Clutch plate 1.0 2
456 Clutch spring 16.6/2.5x39 6
464 Pressure ring 1
467 Retaining plate 1
468 Trust hub 1
motor sprocket
1382 = 22t. 1383= 23t. 1384= 24t. 1385=25t. 1386=26t.
500 Needle bearing ø20/24x10 3
502 Needle bearing ø21/25x10 2
504 Bushing 23.8/25x9.8 1
512 Clutch shaft 1 Gear 12 T.  (467) 1

Not in stock any more

514 Clutch shaft 1 Gear 13 T.  Option (462)  
523 Fixed gear 2 gear 15 T. (4950)   
542 Gear pinion 3/4 gear 14/17 T. (5910) 1
Not in stock any more
544 Gear pinion 3/4 gear 16/19 T. (4977)   
554 Free pinion 5 gear 18 T. (5940) 1
556 Free pinion 5 or 6 gear 22 T. (5963)  Option  
564 Free pinion 5 or 6 gear 20 T. (5966)  1
566 Free pinion 6 gear 19 T. (5965) Option  
571 Trust washer 24.2/27.5x1.5 1
572 Trust washer 20.2/27.5x1 1
573 Trust washer 22/30x1.8 2
574 Trust washer 22/30x2.8 1
575 Trust washer 20.5/30x1 1
576 Washer 17.2/30x1 1
577 Snap ring ø24 4
578 Securing 17x0.7 1
602 Main shaft 1
611 Free pinion 1 gear 32 T. (4949)  1
613 Free pinion 1 gear 31 T. 5904 (new option)
'
615 Free pinion 1 gear 31 T. (4944) Option 1
621 Free pinion 2 gear 29 T. (4964)   
Not in Stock any more
624 Free pinion 2 gear 28 T. (4080) Option 1
632 Free pinion 3 gear 22 T. (5924)  
634 Free pinion 3 gear 24 T. (5928)   1
642 Free pinion 4 gear 23 T. (5933) 1
645 Free pinion 4 gear 25 T. (5932) Option 1
654 Gear pinion 5 gear 22 T. (5954)  1
Not in stock any more
656 Gear pinion 5  gear 26 T. (5973)   1
663 Gear pinion  6 gear 23 T. (5976)   
666 Gear pinion 6 gear 21 T. (5975)   1
670 Shift drum unit 1
682 Shift shaft with pawl 1
684 Spring for shift shaft 1
686 Washer 12.1/18x1.5 2
688 Snap ring 11x1 1
690 Gear shift fork 1 and 3 gear (118) 1
692 Gear shift fork 2 and 4 gear (128)  1
695 Gear shift fork 5 and 6 gear  1
689 Washer to main shaft 1
696 Guide pin 8x100 2
698 Bolt to guide pin and index spring 1
700 Shift lever 1
732 O-Ring 14x1.78 for plug screw  2
741 O-Ring 18.72x2.62 for main shaft  2
742 O-Ring 18.77x1.78 for gear lever hub 1
748 O-Ring 22.3x2.4 for clutch axle, and water 4
751 O-Ring 23.52x1.78 for  index shim 2
754 O-Ring 24x3 for combustion insert 2
759 O-Ring 32.99x2.62 for valve rod housing 2
766 O-Ring 37.82x1.78 for water pump house 1
770 O-Ring 42.52x2.62 FPM for exhaust socket 2
772 O-Ring 44.12x2.62 under exhaust socket 2
774 O-ring 50.47x2.62 under cylinder 2
775 O-Ring 50.52x1.78 3
778 O-Ring 60x2 for cylinder top 2
784 O-Ring 94.92x2.62 for cylinder top 2
786 O-Ring 101.27x2.62  below cyl. and for gearbox cover 3
789 O-Ring 139.38x2.62 for gearbox center 1
792 O-Ring 183.82x2.62 for disc valve cover 1
796 O-Ring line 2.62x980  for primary drive cover 1
799 O-Ring line 2.62x1100 for  crankcase center 1
     
802 Oil seal  12/22x7 1
806 Oil seal  20/35x7 3
812 Oil seal  25/40x7 3
820 Oil seal  58/70x7 1
836 Ball bearing 629  9/26x8 2RS 2
838 Ball bearing 6001 12x28x8 1
840 Ball bearing 61903  17/30x7 1
844 Ball bearing 6203-TN9/C3  17/40x12 1
845 Ball bearing 6203-C3 2RS  17/40x12 1
848 Ball bearing 6004-TN9/C3  20/42x12 2
852 Ball bearing 6304-C3  20/52x15 1
856 Ball bearing 6205 TN9/ C3  25/52x15 1
861 Roller bearing NJ205-E-C4-TPV2  25/52x15 4
862 Back plate for RTD ignition  
864 Rotor hub for RTD ignition  
866 Censor plate for rotor  
880 Ignition stator PVL  500801  1
884 Ignition Rotor PVL  500939  
888 Ignition coil PVL  500199  
892 Digital Ignition coil PVL  500179
898 Spark plug connector  
899 Spark plug connector NGK TRS 1225  
904 Spark plug NGK B10EGP
906 Spark plug NGK R7282-11
 
911 Carburetor PVP 42 mm. 
928 Needle jet DQ 268
929 Needle jet DQ 270
930 Jet needle K24
942

Main jet 195
943 Main jet 198
944 Main jet 200
945 Main jet 202
946 Main jet 205
947 Main jet 208
948 Main jet 210
949 Main jet 212
950 Main jet 215
951 Main jet 218
952 Main jet 220
953 Main jet 222
955 Idle jet B44
958 Washer over main jet
959 Idle jet 120
 
960 Needle valve 250
961 Float   
 
963 Float bowl
964 Plug screw
965 Float arm
966 Axle for 965
968 Choker kit
970 Gasket kit
972 Spring 11,5 x 77
973 Bushing for 972
 
   
974 Idle screw 6x30
975 Spring for 974
980 Puller to Tandem gears
981 Puller to inner ring on main bearing
982 Puller to ignition, clutch drum & primary drive cover
983 Fixation screw to crankshaft M8x30
991 Speed shift to PVL Ignition
992 Speed shift to RTD Ignition
993 Part of speed shift to PVL Ignition
994 Part of speed shift to RTD Ignition
996 Handle for starter
998 Starter for Superkart motor
1382 Motor sprocket 22-T
1383 Motor sprocket 23-T
1384 Motor sprocket 24-T
1385 Motor sprocket 25-T
1386 Motor sprocket 26-T
 
1631 Rubber 8/23,5x19
1650  20x20-M6
1871 Square ring 34x2,94x3,2
 
4011 Adjustable overpressure valve
4012  Fuel pump
4015  Pressure gauge
4016  Fitting strait
4018 Fitting for 4015
4019 T-part for fuel
4036  Fuel filter
4040 R-clip 2 mm.
 
4059  RK-Chain 138 link
4059 Link for 4058
4078  Fuel pipe 6/10 mm.

 
4090  4 to 1 fitting 6 mm.
4091  Fitting to 4090
4092  Hose clamp 11 mm.
4097 Hose clamp 19-28 mm.
4106 Fitting M5x6,0
4108 Fitting 1/8x5,0
4110 Fitting 1/8x6,0
4111 Fitting 1/8x6,0
4112 Fitting 1/8x5,0
4132  Accelerator cable 1,2x2000
4140  Outer cable for accelerator
4145 Heat to 4140
4147 Clamp
4148  Block with 4,5 hole
4149 Block with 3,3 hole
4150 Cable adjust screw 6 mm.
4169 O-ring for exhaust bracket 107,32x5,34
4176  Pipe bend 22 mm.
4600 PVP flag 1x1,5 meter
4611 PVP Cap
6060 Master cylinder for food clutch
6062 Hand clutch left hand
6063 Hand clutch right hand
6072 Front pipe
6073 Rear pipe
6081  PVP silencer
6084 Silencer wool 33x58
6085 Bracket for exhaust
6086 Alum. cradles
9601 Spring 56 mm.
9602 Spring 70 mm.