| Spare parts for PVP 251 Motor | Exchange rate: | 7,42 | 1,05 | |||
| Prices 2008 | Prices | Prices | ||||
| Part no. | Description | Qty. | in DKK | in EURO | ||
| 110 | Crankcase right and left side | 1 | 12.810,00 | 1.726,42 | 12.200,00 | |
| 125 | Indsert to crankcase | 71,40 | 9,62 | 68,00 | ||
| 130 | Primary drive cover | 1 | 2.520,00 | 339,62 | 2.400,00 | |
| 131 | Cover over clutch drum | 1 | 378,00 | 50,94 | 360,00 | |
| 132 | Bracket under clutch drum | 1 | 65,10 | 8,77 | 62,00 | |
| 133 | Clutch relies bracket | 1 | 388,50 | 52,36 | 370,00 | |
| 134 | Piston to clutch relies | 1 | 71,40 | 9,62 | 68,00 | |
| 140 | Bracket for shift shaft | 1 | 126,00 | 16,98 | 120,00 | |
| 144 | Oil seal holder | 2 | 46,20 | 6,23 | 44,00 | |
| 146 | Ring behind right hand main bearing | 2 | 33,60 | 4,53 | 32,00 | |
| 150 | Bracket for ignition stator | 1 | 504,00 | 67,92 | 480,00 | |
| 160 | Bracket behind water pump housing | 1 | 399,00 | 53,77 | 380,00 | |
| 161 | Water pump housing | 1 | 525,00 | 70,75 | 500,00 | |
| 162 | Water pump impeller | 1 | 252,00 | 33,96 | 240,00 | |
| 163 | Tube ø21/25/M25x | 2 | 25,20 | 3,40 | 24,00 | |
| 164 | Tube ø21/25/M25x | 1 | 26,25 | 3,54 | 25,00 | |
| 166 | Bracket to intake, (inside) | 1 | 168,00 | 22,64 | 160,00 | |
| 168 | Plate be twin the disk valve | 1 | 37,80 | 5,09 | 36,00 | |
| 170 | Disc valve cover for Dellorto carburettor | 1 | 2.835,00 | 382,08 | 2.700,00 | |
| 171 | Disc valve cover for PVP carburettor | 2.835,00 | 382,08 | 2.700,00 | ||
| 175 | Insert to disk valve cover | 71,40 | 9,62 | 68,00 | ||
| 180 | Pin hardened ø5x12 | 4 | 5,25 | 0,71 | 5,00 | |
| 182 | Pin hardened ø6x16 | 2 | 6,30 | 0,85 | 6,00 | |
| 190 | Gear box cover | 1 | 1.890,00 | 254,72 | 1.800,00 | |
| 200 | Front crankshaft Comp. With 113 mm. Rod | 1 | 4.641,00 | 625,47 | 4.420,00 | |
| 210 | Rear crankshaft Comp. With 113 mm. Rod | 1 | 4.620,00 | 622,64 | 4.400,00 | |
| 220 | Rod 113 mm. Centre distends | 1.558,20 | 210,00 | 1.484,00 | ||
| 221 | Crankshaft pin ø20/5,9x50 | 169,05 | 22,78 | 161,00 | ||
| 222 | Washer ø20/35x1 | 63,00 | 8,49 | 60,00 | ||
| 223 | Needle cage ø20/24x15 | 210,00 | 28,30 | 200,00 | ||
| 224 | Rod 113 mm. Centre distends New type | 924,00 | 124,53 | 880,00 | ||
| 225 | Crankshaft pin ø20x50 Solid | 163,80 | 22,08 | 156,00 | ||
| 240 | Tandem gear 47 T. | 1 | 1.843,80 | 248,49 | 1.756,00 | |
| 250 | Tandem gear 47/26 T. | 1 | 1.921,50 | 258,96 | 1.830,00 | |
| 260 | Nut M22x1.5 for crankshaft | 2 | 21,00 | 2,83 | 20,00 | |
| 270 | Disc valve hub ø41x6.5 | 2 | 100,80 | 13,58 | 96,00 | |
| 281 | Disc valve in Carbon fibre ø134x1 | 2 | 304,50 | 41,04 | 290,00 | |
| Cylinder and parts for this | 0,00 | 0,00 | 0,00 | |||
| 300 | PVP Cylinder 2005 | 2 | 3.990,00 | 537,74 | 3800,00 | |
| 324 | Combustion chamber insert 2.2 mm | 2 | 294,00 | 39,62 | 280,00 | |
| 325 | Combustion chamber insert 2.25 mm | 2 | 294,00 | 39,62 | 280,00 | |
| 326 | Combustion chamber insert 2.3 mm | 2 | 294,00 | 39,62 | 280,00 | |
| 327 | Combustion chamber insert 2.35 mm | 294,00 | 39,62 | 280,00 | ||
| 329 | Combustion chamber insert 2.2-1 mm | 2 | 294,00 | 39,62 | 280,00 | |
| 330 | Combustion chamber insert 2.25-1 mm | 2 | 294,00 | 39,62 | 280,00 | |
| 331 | Combustion chamber insert 2.3-1 mm | 2 | 294,00 | 39,62 | 280,00 | |
| 332 | Combustion chamber insert 2.35-1 mm | 294,00 | 39,62 | 280,00 | ||
| 334 | Cylinder head cover | 2 | 504,00 | 67,92 | 480,00 | |
| 335 | Cylinder head cover rear with M8 | 514,50 | 69,34 | 490,00 | ||
| 338 | Plug screw M18x1.5 | 4 | 13,65 | 1,84 | 13,00 | |
| 340 | Tube ø18x30 (224090) | 27,30 | 3,68 | 26,00 | ||
| 351 | Alum. Exhaust socket ø41 | 1 | 336,00 | 45,28 | 320,00 | |
| 353 | Alum. Exhaust socket ø41 18DG | 1 | 472,50 | 63,68 | 450,00 | |
| 359 | Steel ring ø48/41x17 for exhaust pipes | 0 | 52,50 | 7,08 | 50,00 | |
| 360 | Exhaust valve slide | 189,00 | 25,47 | 180,00 | ||
| 361 | Exhaust valve slide, new complete type | 2 | 231,00 | 31,13 | 220,00 | |
| 364 | Thread sleeve M6 | 50,40 | 6,79 | 48,00 | ||
| 374 | Compression spring 13.2x0.8x52.5 (239941) | 10,50 | 1,42 | 10,00 | ||
| 375 | Compression spring 13.3x0.9x48.5 (239944) | 2 | 10,50 | 1,42 | 10,00 | |
| 376 | Valve rod housing | 2 | 199,50 | 26,89 | 190,00 | |
| 378 | Bellows rubber (260721) | 2 | 141,75 | 19,10 | 135,00 | |
| 380 | Valve rod ø6/m6x78.5 | 84,00 | 11,32 | 80,00 | ||
| 382 | Valve piston (253250) | 2 | 77,70 | 10,47 | 74,00 | |
| 390 | Needle bearing 15/19x19.6 | 2 | 63,00 | 8,49 | 60,00 | |
| 391 | C-clip for piston | 2,94 | 0,40 | 2,80 | ||
| 392 | Piston ring ø54x1 | 134,40 | 18,11 | 128,00 | ||
| 393 | Piston pin ø15x45 | 113,40 | 15,28 | 108,00 | ||
| 394 | Piston Vertex ø53.94 | 483,00 | 65,09 | 460,00 | ||
| 395 | Piston Vertex ø53.95 | 2 | 483,00 | 65,09 | 460,00 | |
| 396 | Piston Vertex ø53.96 | 483,00 | 65,09 | 460,00 | ||
| 397 | Piston Vertex ø53.97 | 483,00 | 65,09 | 460,00 | ||
| 405 | Clutch gear 58/18 | 1 | 2.278,50 | 307,08 | 2.170,00 | |
| 410 | Trust washer ø20/35x3.7 | 1 | 31,50 | 4,25 | 30,00 | |
| 411 | Inner race ø20/29x17 (232700) | 1 | 86,31 | 11,63 | 82,20 | |
| 412 | Needle bearing ø25/29x17 (232890) | 1 | 89,57 | 12,07 | 85,30 | |
| 414 | Trust washer ø20/35x1 | 1 | 10,50 | 1,42 | 10,00 | |
| 415 | Hex. Nut M18x1.5 (942220) | 1 | 20,37 | 2,75 | 19,40 | |
| 416 | Tab washer NA20 (245320) | 1 | 9,66 | 1,30 | 9,20 | |
| 420 | Clutch drum | 1 | 1.470,00 | 198,11 | 1.400,00 | |
| 430 | Inner pressure plate (6 tab) (259570) | 1 | 183,33 | 24,71 | 174,60 | |
| 435 | Clutch hub (259064) | 1 | 235,20 | 31,70 | 224,00 | |
| 440 | Sinterplate 3.0 mm (259990) | 5 | 174,30 | 23,49 | 166,00 | |
| 445 | Clutch plate 1.5 (259556) | 4 | 45,36 | 6,11 | 43,20 | |
| 450 | Clutch plate 1.0 (259558) | 2 | 45,36 | 6,11 | 43,20 | |
| 455 | Clutch Spring ø15.7/2.4x38 (239741) | 6 | 13,65 | 1,84 | 13,00 | |
| 464 | Pressure ring (259295) | 1 | 81,90 | 11,04 | 78,00 | |
| 465 | Retaining plate (259290) | 1 | 186,06 | 25,08 | 177,20 | |
| 466 | Attache (244030) | 2 | 47,25 | 6,37 | 45,00 | |
| 468 | Trust hub (259300) | 1 | 46,62 | 6,28 | 44,40 | |
| Gear box spare parts | ||||||
| 500 | Needle bearing ø20/24x10 (232662) | 3 | 52,50 | 7,08 | 50,00 | |
| 502 | Needle bearing ø21/25x10 (232742) | 2 | 37,80 | 5,09 | 36,00 | |
| 504 | Bushing 23.8/25x9.8 (233500) | 1 | 66,68 | 8,99 | 63,50 | |
| Gears on clutch axle | ||||||
| 512 | Clutch shaft 1 gear 12 T. (237-467) | 1 | 924,00 | 124,53 | 880,00 | |
| 514 | Clutch shaft 1 gear 13 T. (237-462) Option | 925,05 | 124,67 | 881,00 | ||
| 521 | Fixed gear 2 gear 14 T. (23-5307) | 1 | 367,50 | 49,53 | 350,00 | |
| 523 | Fixed gear 2 gear 15 T. (23-4950) Option | 338,10 | 45,57 | 322,00 | ||
| 542 | Gear Pinion 3/4 gear 14/17 T. (23-5910) | 1 | 622,65 | 83,92 | 593,00 | |
| 544 | Gear Pinion 3/4 gear 16/19 T. (23-4977) Option | 663,60 | 89,43 | 632,00 | ||
| 554 | Free pinion 5 gear 18 T. (23-5940) | 1 | 459,90 | 61,98 | 438,00 | |
| 556 | Free pinion 5 or 6 gear 22 T. (23-5963) Option | 420,53 | 56,67 | 400,50 | ||
| 564 | Free pinion 5 or 6 gear 20 T. (23-5966) | 1 | 406,35 | 54,76 | 387,00 | |
| 566 | Free pinion 6 gear 19 T. (23-5965) Option | 394,80 | 53,21 | 376,00 | ||
| Washer and C-rings for gear box | 0,00 | 0,00 | 0,00 | |||
| 571 | Trust washer 24.2/27.5x1.5 (227470) | 1 | 5,78 | 0,78 | 5,50 | |
| 572 | Trust washer 20.2/27.5x1 (227440) | 1 | 4,94 | 0,67 | 4,70 | |
| 573 | Trust washer 22/30x1.8 (277460) | 2 | 13,13 | 1,77 | 12,50 | |
| 574 | Angular ring 22/30x2.8 (227490) | 1 | 38,85 | 5,24 | 37,00 | |
| 575 | Trust washer 20.5/30x1 (944468) | 1 | 4,20 | 0,57 | 4,00 | |
| 576 | Washer 17.2/30x1 (227370) | 1 | 17,85 | 2,41 | 17,00 | |
| 577 | Snap ring ø24 (245340) | 4 | 4,94 | 0,67 | 4,70 | |
| Main shaft and pinion on this. | ||||||
| 600 | Main shaft (237-597) | 1 | 732,90 | 98,77 | 698,00 | |
| 611 | Free pinion 1 gear 32 T. (23-4949) | 1 | 761,25 | 102,59 | 725,00 | |
| 615 | Free pinion 1 gear 31 T. (23-4944) Option | 749,70 | 101,04 | 714,00 | ||
| 621 | Free pinion 2 gear 29 T. (23-4964) | 1 | 714,00 | 96,23 | 680,00 | |
| 624 | Free pinion 2 gear 28 T. (23-4080) Option | 699,30 | 94,25 | 666,00 | ||
| 632 | Free pinion 3 gear 22 T. (23-5924) | 1 | 701,40 | 94,53 | 668,00 | |
| 634 | Free pinion 3 gear 24 T. (23-5928) Option | 705,60 | 95,09 | 672,00 | ||
| 642 | Free pinion 4 gear 23 T. (23-5933) | 1 | 720,30 | 97,08 | 686,00 | |
| 645 | Free pinion 4 gear 25 T. (23-5932) Option | 782,25 | 105,42 | 745,00 | ||
| 654 | Gear Pinion 5 gear 22 T. (23-5954) | 1 | 543,90 | 73,30 | 518,00 | |
| 656 | Gear Pinion 5 or 6 gear 26 T. (23-5973) Option | 645,75 | 87,03 | 615,00 | ||
| 663 | Gear pinion 5 or 6 gear 23 T. (23-5976) | 1 | 640,50 | 86,32 | 610,00 | |
| 666 | Gear pinion 6 gear 21 T. (23-5975) Option | 535,50 | 72,17 | 510,00 | ||
| Gear shift system | ||||||
| 670 | Shift drum unit (258228) | 1 | 703,50 | 94,81 | 670,00 | |
| 672 | Index shim (258210) | 1 | 287,70 | 38,77 | 274,00 | |
| 674 | Index lever unit (248326) | 1 | 101,33 | 13,66 | 96,50 | |
| 678 | Index spring (239240) | 1 | 28,35 | 3,82 | 27,00 | |
| 680 | Step ring (227710) | 1 | 14,18 | 1,91 | 13,50 | |
| 682 | Shift shaft with pawl (220187) | 1 | 478,80 | 64,53 | 456,00 | |
| 684 | Spring for shift shaft (239251) | 1 | 52,50 | 7,08 | 50,00 | |
| 686 | Washer ø12.1/18.0x1.5 | 2 | 1,68 | 0,23 | 1,60 | |
| 687 | Washer ø8.2/16.0x1.5 Hardened | 2 | 1,89 | 0,25 | 1,80 | |
| 688 | Snap ring ø12x1 | 1 | 1,89 | 0,25 | 1,80 | |
| 690 | Gear shift fork 1 and 3 gear (258118) | 1 | 473,03 | 63,75 | 450,50 | |
| 692 | Gear shift fork 2 and 4 gear (258128) | 1 | 532,88 | 71,82 | 507,50 | |
| 694 | Gear shift fork 5 and 6 gear (258133) | 1 | 532,88 | 71,82 | 507,50 | |
| 696 | Guide pin ø8x100 | 2 | 33,60 | 4,53 | 32,00 | |
| 698 | Bolt to guide pin and index spring | 2 | 42,00 | 5,66 | 40,00 | |
| 700 | Shift lever (248232) | 1 | 206,85 | 27,88 | 197,00 | |
| O-Rings | ||||||
| 725 | O-Ring ø5x3.0 for valve rod | 2 | 5,25 | 0,71 | 5,00 | |
| 732 | O-Ring ø12x1.78 for plug screw | 2 | 5,25 | 0,71 | 5,00 | |
| 733 | O-Ring ø12x2.5 for cylinder bottom water hole | 5,25 | 0,71 | 5,00 | ||
| 740 | O-Ring ø18.64x3.53 for main shaft | 2 | 7,35 | 0,99 | 7,00 | |
| 741 | O-Ring ø18.72x2.62 for water ramification | 6,30 | 0,85 | 6,00 | ||
| 742 | O-Ring ø18.72x1.78 for gearlever axle hub | 1 | 6,30 | 0,85 | 6,00 | |
| 748 | O-Ring ø22.3x2.4 for clutch axle | 1 | 6,30 | 0,85 | 6,00 | |
| 751 | O-Ring ø23,52x1,78 for water and index shim | 2 | 5,25 | 0,71 | 5,00 | |
| 754 | O-Ring ø24x3 for combustion insert | 2 | 6,30 | 0,85 | 6,00 | |
| 757 | O-Ring ø29.82x2.62 for valve rod housing & Clutch drum | 3 | 6,83 | 0,92 | 6,50 | |
| 766 | O-Ring ø37.82x1.78 for Water pump house | 1 | 7,35 | 0,99 | 7,00 | |
| 770 | O-Ring ø42.52x2.62 FPM for steel ring # 359 | 4 | 21,00 | 2,83 | 20,00 | |
| 772 | O-ring 42.52x2.62 for Alum. Exhaust socket | 2 | 21,00 | 2,83 | 20,00 | |
| 775 | O-Ring ø50.52x1.78 for Oil seal, water and ignition adp. | 4 | 8,40 | 1,13 | 8,00 | |
| 778 | O-Ring ø60x2 for cylinder top | 2 | 9,45 | 1,27 | 9,00 | |
| 780 | O-Ring ø69.52x2.62 for Cover over clutch | 1 | 9,45 | 1,27 | 9,00 | |
| 783 | O-Ring ø88.62x1.78 for cylinder top | 2 | 10,50 | 1,42 | 10,00 | |
| 786 | O-Ring ø101.27x2.62 for below Cyl. and gearbox Cover | 3 | 12,60 | 1,70 | 12,00 | |
| 789 | O-Ring ø139.38x2.62 for gear box centre | 1 | 14,70 | 1,98 | 14,00 | |
| 792 | O-Ring ø183.82x2.62 for disc valve cover | 1 | 27,30 | 3,68 | 26,00 | |
| 795 | O-Ring line ø2.62x850 primary drive cover | 1 | 14,70 | 1,98 | 14,00 | |
| 798 | O-Ring line ø2.62x1060 crankcase centre | 1 | 18,90 | 2,55 | 18,00 | |
| Oil seal | ||||||
| 802 | Oil seal ø12/22x7 (250455) | 1 | 37,80 | 5,09 | 36,00 | |
| 806 | Oil seal ø20/35x7 (930265) | 3 | 79,80 | 10,75 | 76,00 | |
| 812 | Oil seal ø25/40x7 (230395) | 3 | 48,30 | 6,51 | 46,00 | |
| 820 | Oil seal ø58/70x7 (230790) | 1 | 82,95 | 11,18 | 79,00 | |
| Ball Bearing and Roller Bearing | ||||||
| 833 | Ball Bearing 608 ø8/22x7 | 1 | 39,90 | 5,38 | 38,00 | |
| 836 | Ball Bearing 629 ø9/26x8 2RS | 1 | 46,62 | 6,28 | 44,40 | |
| 838 | Ball Bearing 6001 12/28x8 | 1 | 35,70 | 4,81 | 34,00 | |
| 840 | Ball Bearing 61903-2RS ø17/30x7 | 1 | 94,50 | 12,74 | 90,00 | |
| 844 | Ball Bearing 6203-C3 ø17/40x12 | 1 | 46,83 | 6,31 | 44,60 | |
| 845 | Ball Bearing 6203-C3 2-RS ø17/40x12 | 1 | 52,50 | 7,08 | 50,00 | |
| 848 | Ball Bearing 6004-C3 ø20/42x12 | 2 | 58,80 | 7,92 | 56,00 | |
| 852 | Ball Bearing 6304-C3 2RS ø20/52x15 | 1 | 84,00 | 11,32 | 80,00 | |
| 856 | Ball Bearing 6205E-TVH C3 ø25/52x15 | 1 | 168,00 | 22,64 | 160,00 | |
| 860 | Roller Bearing NJ 205-E 25/52x15 | 4 | 262,50 | 35,38 | 250,00 | |
| Ignition | ||||||
| 880 | PVL Stator 500-1001 IDX A (500801) | 1 | 516,60 | 69,62 | 492,00 | |
| 884 | PVL Rotor 105 500-0939 (500939) | 1 | 634,20 | 85,47 | 604,00 | |
| 888 | PVL Ignition coil 500-30.02 IDX C (500199) | 1 | 415,80 | 56,04 | 396,00 | |
| 892 | PVL Digital coil 500-30.03 IDX C (500179) | 1 | 1.575,00 | 212,26 | 1500,00 | |
| 898 | Spark plug connector (401222) | 2 | 67,20 | 9,06 | 64,00 | |
| 904 | Spark plug NGK B10EGP | 2 | 236,25 | 31,84 | 225,00 | |
| 0,00 | 0,00 | 0,00 | ||||
| 920 | Carburettor Dellorto VHSC 39,5 racing | 6.000,00 | 808,63 | 4500,00 | ||
| 928 | Needle jet DQ 268 | 99,23 | 13,37 | 94,50 | ||
| 930 | Jet Needle K24 | 32,03 | 4,32 | 30,50 | ||
| 939 | Main jet 188 | 20,48 | 2,76 | 19,50 | ||
| 940 | Main jet 190 | 20,48 | 2,76 | 19,50 | ||
| 941 | Main jet 192 | 20,48 | 2,76 | 19,50 | ||
| 942 | Main jet 195 | 20,48 | 2,76 | 19,50 | ||
| 943 | Main jet 198 | 20,48 | 2,76 | 19,50 | ||
| 944 | Main jet 200 | 20,48 | 2,76 | 19,50 | ||
| 958 | Washer over main jet | 7,88 | 1,06 | 7,50 | ||
| 960 | Needle valve 250 | 90,83 | 12,24 | 86,50 | ||
| 980 | Puller to Tandem gears | 441,00 | 59,43 | 420,00 | ||
| 981 | Puller to inner ring on main bearing | 117,60 | 15,85 | 112,00 | ||
| 982 | Puller to ignition, clutch drum and Primary drive cover | 84,00 | 11,32 | 80,00 | ||
| 983 | Fixation screw to crankshaft M8x30 | 12,60 | 1,70 | 12,00 | ||
